3M DL, SE Setting logging options,  Enabling or disabling logging options, Exceedance options

32

Logging

Setting logging options

Setting logging options

To set logging only options (Average, Peak, Maximum, Minimum)

Enabling or disabling logging options

1.Ensure you are at the start screen.

•If turned on, repeatedly press On/Off/Esc until you return to the start screen (see Figure 3-3 above).

•To turn on, press and hold On/Off/Esc until the start screen appears.

2.Press Up/Down to highlight Setup and then press Enter .

3.Select Logging by pressing Up/Down to highlight and then press Enter .

4.To change the Logging options for Meter 1 do the following:

a.Press Up/Down to highlight either AVG, PEAK, MAX, MIN.

b.Once the measurement is selected, press Enter button to toggle between “On” or “Off”. Press right/left arrow to move back to logging field.

NOTE: If you are setting Meter 2 options, ensure you are on Meter 2 by pressing the Meter 1/Meter 2 softkey, and then repeat step 4a-b.

Logging options On/Off setting

•AVG (average)

•Peak

•MAX (maximum)

•MIN (minimum)

Exceedance options

Set % by using the up/down arrows.

• L1

• L5

Filters

•On/Off setting

Logging Interval

•Logging rate which can be set at various minutes and second values

Softkey: Meter 1/Meter 2

Figure 3-8: Logging screen explained

5.To change the Exceedance Levels on Meter 1, press Up/Down to select either L1 or L2

Models SE and DL