35

Setting up display options

Backlight

Backlight

Typically, the SoundPro is shipped with the

 

backlight setting enabled. With a quick press of

 

the backlight button from the keypad, you can

 

quickly turn on and turn off the backlight.

Backlight

 

The backlight feature has an optional timed setting for various second intervals ranging from

1 second to 60 seconds. Once a timed setting is activated and you press the backlight button, the

backlight will illuminate for the selected interval (i.e., 10 seconds) and then turn off.

NOTE: Backlighting consumes energy at an increased rate. Leaving it on while operating with batteries will decrease battery life by up to 10%.

Setting or viewing Backlight options

1. From the start screen, press Up/Down

to highlight Setup and

press Enter

.

 

2.In the Setup screen, press Up/Down to highlight Display and press Enter .

3.In the Display screen, press Up/Down to highlight Backlight.

4.Press Enter to move to the data field. Repeatedly press Enter to toggle between “Manual” and “XX Sec” fields.

NOTE: if you are not setting the timed backlight, skip step four.

5.To change the timed backlight, ensure you are on a timed value (i.e., 10

seconds) and repeatedly press Up/Down

to increase or decrease the

time. Once set, press the Left arrow.

 

LANGUAGE

BACKLIGHT

CONTRAST

Backlight settings

Manual – The backlight is turned on and turned off by pressing the backlight button on the keypad.

Interval time – repeatedly press Up/Down arrow to increase or decrease the seconds.

Figure 3-11: Backlight setting

6. Press On/Off/ESC twice to return to the start screen.

Models SE and DL

Page 48
Image 48
3M SE, DL user manual  Setting or viewing Backlight options, Backlight settings