3M SE, DL user manual  Loading or deleting a file

Loading and deleting files

A bar chart or a filtered bar chart may appear (depending on your measurement setting). Press Enter to view various measurement

screens.Review mode indicator

Bar chart (SLM mode) results

File path – indicates the name of

session/study, the analysis type

(SLM, 1/1, 1/3)

Figure 7-6: Viewing past data example

6.

Loading and deleting files

115File directories

7.Press Stop key to exit Review Mode. (The Pause icon will disappear leaving only the Stop indicator displayed on your screen.)

As you are working with loading past files and possibly deleting files which have been imported into QSP-II, it is important to note that the delete operations take place as soon as you press the respective softkey. While you can re-load a file, you cannot un-delete a file, so be careful. (Loading and deleting files is accessed via the File softkey\Session Directory menu.)

Loading or deleting a file

1.From the start screen, press the File softkey.

2.In the File menu, ensure Session Directory is highlighted (if it is not,

press until it is selected.) Press key.

3.To load a file, press to select the appropriate file and press Load softkey (see “b”) or press key (skip this step if you are deleting a file).

Models SE and DL