46

Locking setup or run mode

Setting secure run or secure setup (locking)

10.To activate Triggered Run on the Meter 2, press the right arrow and select one of the five sources by pressing Enter repeatedly until you are viewing the appropriate feature. (If you are only setting Meter 1, please skip this step.)

11.To move to the next field press the Down arrow.

12.To select a Level, press the Right arrow. Press Enter repeatedly until you are viewing the appropriate setting.

13.Press On/Off/Esc repeatedly to return to the start screen. When you are ready to run your study, press Run/Pause .

Locking setup or run mode

The locking or security feature is designed to lock the SoundPro during a run to ensure the study will not be stopped unless the lock feature is disabled. Likewise, this feature includes a locked (or secure) setup mode which will stop a user from editing a programmed setup. Once setup and enabled, the secure run or secure setup are unlocked, by pressing the Lock softkey and entering in the code.

NOTE: Security settings survive a shutdown.

Setting secure run or secure setup (locking)

Run Security and Setup Security are both enabled and disabled in the Lock screen. For Secure Run, you can be in pause or stop mode when locking. For Secure Setup, you must be in stop mode to set and enable this feature.

About Secure Run

When you enable Run Mode Security and start a run, the Secure Run Mode screen appears (Figure 4-10). This will prevent users from viewing the measurements, changing parameters, and/or stopping the run. To stop the secured run, you will have to press the Lock softkey and enter in the code. Then, you would be able to stop the run by pressing the Stop key.

NOTE: With Run Mode security enabled, the Secure Run Mode screen always appears regardless whether the study was started manually, by Auto- Run or by Triggered studies.

About Secure Setup

Setup Mode security blocks access to setup screens while in stop mode.

(NOTE: When in run mode, the SoundPro automatically blocks the user from changing settings to ensure the settings remain the same throughout the session.) Once enabled and the user selects setup, the Secure Setup mode prompt will appear and it prevents someone from changing settings until unlocked.

Models SE and DL

Page 59
Image 59
3M DL, SE Locking setup or run mode, Setting secure run or secure setup locking, About Secure Run, About Secure Setup