3M DL, SE user manual  Battery Check screen, Setup, Softkey buttons

16

Providing power

Checking or changing type

Battery Check screen

1.Turn on the SoundPro SE/DL by pressing On/Off/ESC . You will be at the start screen.

•If turned on, ensure you are at the start screen by pressing On/Off/Esc repeatedly until the start screen appears.

Setup

Figure 2-6: Selecting Setup in the Start Screen

2.Press Up/Down arrows to highlight Setup and then press Enter .

3.In the Setup screen, select Battery, then press Enter . The Battery Check screen appears.

A:Press softkey to select Alkaline

B : Press softkey to select NiMH

Softkey buttons

Figure 2-7: Selecting battery type in battery check screen

4.Press the softkey that corresponds with the installed battery type (See “A” or “B” in Figure 2-7 for selection). The label above the softkey is underlined to indicate the current selection.

5.When completed, press On/Off/Esc once to return to the Setup screen and twice to return to the start screen.

Models SE and DL