17

Providing power

Using power supply or auto adapter

Using power supply or auto adapter

If you obtained the optional Universal power supply

 

 

 

9V cable or the Auto DC Jack 12 VDC adapter from

 

 

Auto

3M, plug them into their respective power sources

 

 

adapter

and the other end into the Power jack of the

 

 

 

 

 

 

instrument. If the external power source provides

 

 

 

 

 

 

the correct voltage (8-16 VDC) and sufficient

 

 

Universal

 

current (300 mA minimum), it will be used in

 

 

power

place of the batteries if they’re installed in the

 

 

supply

instrument.

 

 

 

Figure 2-8 illustrates the assembly of the Universal power supply and the plug adapter. It slides into place by guiding it down the back cavity (opening) of the power supply.

-NOTE: the example is a typical adapter which may be different than the one you are using. Mechanically, it will function similarly.

A. Universal power supply 9V

B. Slide plug adapter into the crevices of base

 

Figure 2-8: Attaching the charger adapter with the plug adapter

Connecting power supply source

1.Ensure the power supply is assembled (for universal power supply only).

2.Plug the power cord into the power jack by opening the base cover. Attach the opposite end into the power supply (i.e., outlet/automobile jack) (as discussed in “Hardware interfaces”, page 6.)

Power Jack

Figure 2-9: Base (or bottom) of SoundPro

3.Plug the opposite end into the power supply.

Models SE and DL

Page 30
Image 30
3M SE, DL user manual Using power supply or auto adapter, Base or bottom of SoundPro