3M SE, DL user manual Detection Management Software DMS, DMS Start, Navigational buttons

9 Detection Management Software DMS

DMS Start Page

Detection Management Software DMS

3M™ Detection Management Software DMS is used to record, report, chart and analyze data collected for assessment of select occupational health hazards in the workplace. Designed for dosimetry, sound level measurements, heat stress assessments and environmental monitoring, the software helps safety and occupational professionals:

•Retrieve, download, share and save instrument data

•Generate insightful charts and reports

•Export and share recorded data

•Perform “What If” analysis and recalculate data based on selected time intervals

•Set up instruments and check for firmware updates

Some data can only be displayed in DMS. One example is logging data obtained when logging is enabled in an instrument equipped with that option (“Logging” on page 33). Another example is with the GPS function. When enabled the data is viewable in DMS.

DMS Start Page

Navigational buttons

(1)Setup

(2)Download

(3) Data Finder (look at your session data or use Quick Report feature)

Models SE and DL