119

Configuration directory

Viewing, loading, deleting setup files (config.)

4.To change the file name follow below:

Press to change the selected character (denoted by the underline).

Optional Shortcut: press a softkey (has a character range) and then

press to quickly move to the appropriate value.

Press Left arrow to delete a character (or move backwards).

Press Right arrow to add a character.

Repeat as necessary.

5.To save your setup, press the On/Off/Esc and the Save option will be highlighted. Press Enter key to save (or press On/Off/Esc key to cancel).

Viewing, loading, deleting setup files (config.)

Viewing, loading, deleting setup files

1.Open the Configuration Directory screen (follow steps 1-2 above , “Saving setup file”).

2.The Setup File screen will appear. Depending on what setups you saved, these will appear in this screen.

3.To Load or Delete a file configuration, do the following:

Select a file you wish to load/delete (by pressing up/down arrow until selected.)

Once selected, press either the Load softkey (to load and apply the saved setup) or press Delete (to delete a setup).

Press On/Off/Esc to repeatedly to return to the Start screen.

Delete softkey

Load softkey

Once selected, it will

Select a set-up

apply the saved

then press

setup.

Delete softkey

 

Figure 7-11: Viewing, loading, deleting setup files

Models SE and DL

Page 132
Image 132
3M SE Viewing, loading, deleting setup files config,  Viewing, loading, deleting setup files, Delete softkey Load softkey