64

Running a session/study

Performing a calibration

Pause indicator

Post-Cal

Displays post- calibration information

Figure 5-5: Post-Calibrate history screen

Running a session/study

You run a “session”, commonly called opening a session, by running (or starting) the first measurement. To run a “study”, you would press pause and then proceed in the run mode. This would save the measurement as a “study”. Studies will be saved as you continue to run and pause your measurements. Once stopped, this will save as one session.

Running a session/study

1.From the Start screen, select either View Session or select View Current Study.

2.To select, press arrows and then press .

3. Press to begin measuring. A session is currently open for the instrument when either the Run icon or the Pause icon appears in the Status Area at the top of the screen.

RunTime

Run icon

Battery icon

Lookup softkey

Figure 5-6: Bar Chart screen in run mode

Models SE and DL

Page 77
Image 77
3M DL, SE user manual  Running a session/study, Post-Cal