3M DL Configuration directory, Saving & naming setup file config. file, Save, Name/Rename file

118

Configuration directory

Saving (& naming) setup file (config. file)

•Add a character by pressing the right arrow key.

•Delete a character by pressing the left arrow key.

•Repeat this step as necessary.

5.When finished, press and Save will appear.

6.Press to save the file name (or press On/Off/Esc to cancel).

Configuration directory

File Setups, or File Configurations, can be saved to the instrument in order to save and reuse for future. (This can also be performed via QSP-II when you save a setup.)

The naming/renaming procedure below includes a lookup utility that you can use to determine what name to assign.

Saving (& naming) setup file (config. file)

When saving a setup, you first select the settings and then save via the Save Config File (accessed from the File softkey in the start menu.) Once a configuration is saved, you can view or delete it via the Config. Directory.

Naming and Saving set-up

1.Ensure the SoundPro is in Stop mode and the parameters are selected. (See Chapter 3 and Chapter 4 for details.)

2.In the Start screen, press the File softkey and select Save Config. File.

3.In the Setup File screen, press to move to the name/rename file field.

Save

Press on/off/esc to move to this field

Selected character (indicated by the underline). Press up/down to change character. Press Left arrow to move to add another character. Press Right to delete or change a character.

Name/Rename file

Press a softkey to quickly select a character set. Then, press up/down arrows.

Figure 7-10: Saving/Creating setup file (config. file)

Models SE and DL