3M SE, DL Class/Type 1 and Class/Type 2 instrument, Windscreen, Class/Type 2 microphones Remove

13

Microphone and accessories

Class/Type 1 and Class/Type 2 instrument

Class/Type 1 and Class/Type 2 instrument

The SoundPro is shipped with the Type 1 in a protective case with a serial number labeled on the side of the microphone. Similarly, the SoundPro with the Class/Type 2 microphone is also shipped in a protective case. To attach and remove the microphone, please follow one of the types below:

•BK4936 microphone - Remove the microphone from its case and thread it on the SoundPro SE/DL preamp in accordance with the instructions provided in the microphone case. Note that the BK4936 microphone is provided with a Random Incidence Corrector (RIC). Use the same microphone instructions for information about using and installing that device.

•All other Class/Type 1 microphones - Remove the microphone from its protective case and thread it on the preamp. Before using, be sure to remove the plastic cap and save it in the case for future use.

•Class/Type 2 microphones – Remove the

microphone from its protective case and thread it on	No
the preamp. Before using, be sure to remove plastic	Yes
cap and save it in the case for future use.

NOTE: to properly remove the microphone, please adhere to the caution sticker located on the backside of the instrument and the drawing to the right.

Windscreen

Use a windscreen that fits the tip of the microphone to reduce sound disturbances caused by physical contact and wind turbulence. 3M provides the WS-7 windscreen that fits a ½-inch microphone with every instrument kit. If you didn’t order a ½-inch microphone, or if you have one of different size, you may wish to order a windscreen for the other size.

Figure 2-3: SoundPro with microphone and windscreen

Models SE and DL