25

Basic setups

Time and date

6.Press Enter . The result will be one of the following:

For Sensitivity and Range Cap fields - The highlighting moves to the

data field. Press Up/Down arrows to change the value.

Polarization field - Polarization remains highlighted. Continue to press Enter to change (or toggle) the value from 0 V to 200 V.

7. Once desired fields are changed, press On/Off/ Esc

twice to return to

the Start screen.

 

Time and date

SoundPro SE/DL uses a 24-hour clock and specifies date by month and year.

Changing time and date settings

1.Turn on the SoundPro SE/DL by pressing On/Off/Esc .

If turned on, ensure you are at the start screen by pressing On/Off/esc repeatedly until you return to start screen (see Figure 2-10).

2.Press Up/Down to highlight Setup and then press Enter .

3.In the Setup screen, select Time-Date, then press Enter .

4.In the Time-Date screen, press to select either the Time, Date, Day fields. Then do one of the following:

a.For Time field, press Enter repeatedly to highlight either the hour,

minutes, or seconds. Next, press Up/Down to change the value.

b.For Date field, press Enter repeatedly to highlight either day, month,

or year. Next, press Up/Down to change the value.

c.For Day field, press Enter repeatedly to highlight either day, month,

or year. Next, press Up/Down to change the value.

a. Time

b. Date

c. Day

Figure 3-2: Time and Date Settings

Models SE and DL

Page 38
Image 38
3M SE, DL user manual Time and date,  Changing time and date settings