3M SE, DL user manual Auto-Run #1, Time settings

39

Setting up auto-run

Date setting

5.Press one of the four softkeys in the Auto-Run Date screen to assign a numbered setting (i.e., “Auto-Run #1).

NOTE: if setting up for the first time, the Date screen will appear as “Auto-Run” “Off”. To turn on Auto-Run # 1, #2, #3, or #4, select the appropriate softkey. (For example, Figure 4-3 displays setting up softkey #1 parameters. When activated a “+” symbol appears.)

6.To set Date values, press Enter to move to the first field.

•To change the fields, press repeatedly Up/Down . To move between the day, month, and year fields, press the right/left arrows.

Example: Press first softkey to activate “Auto- run #1” settings

Auto-Run #1

Indicates which 1-4 softkeys is being viewed or set

Day, Month, Year fields

Time settings

Add Start time (S) (8:15:00am) Add Duration (D)

(16 hr, 30min, 0 sec.) (or 6:30:00pm)

Figure 4-2: Setting Date parameters for Auto-Run #1

7.To enter Start (S) Time and Duration (D) Time, it is important to note that the settings are formatted as Hours:Minutes:Seconds and based on a

24-hour clock. In Figure 4-3, the Start time is indicated as “16:30:00” which is equivalent to 4:30pm.

•To Set, press Up/Down arrows to increase/decrease values. To move between each increment, press Enter .

8.To set additional Auto-Runs, repeatedly press Enter until “Auto-Run” is

highlighted. Then press Enter to toggle on the Date and Time settings. Then follow steps 5-7.

9.To exit the screen, press On/Off/Esc repeatedly until you return to the main screen. Press and hold the On/Off/Esc to power off.

Models SE and DL