3M SE, DL user manual Basic setups, Signal Input BK4936 QE7052 QE4110 QE4130 QE4150 QE4170

23

Basic setups	CHAPTER
	3
Navigating

Basic setups

This chapter covers the basic features and setups of SoundPro SE/DL that establish the instrument’s operating conditions. For information about the more advanced SoundPro SE/DL features and their setups, see Chapter 4, “Advanced setups.” For information on setting-up and measuring add-on features (Reverberation, STI-PA, or Curves), please see Chapter 6.

•Microphone Settings

•Setting Date-Time

•Setting Measurement type (SLM, 1/1, 1/3, STI-PA)

•Setting up Meter 1/Meter 2 parameters

•Setting up Exceedance levels

•Setting up Logging

•Setting physical settings: backlight “on” time, contrast, choosing a language

•Microphone settings

With Class/Type 1 models, the microphone’s sensitivity, range cap, and polarization can be checked and/or changed in the “Signal Input” menu (when stopped). Alternatively, Class/Type 2 models settings are viewable at any time the session is stopped but cannot be modified.

The following table displays the required microphone settings.

Signal Input	BK4936	QE7052	QE4110	QE4130	QE4150	QE4170
Sensitivity a	-28.0	-29.0	-49.1	-36.0	-26.0	-28.0
Range Cap (dB)	140	140	160	140	140	140
Polarization (V)	0	0	200	200	200	200

Table 3-1: Required microphone settings

Models SE and DL