Printing the Quick Start Program Confirmation Report

2Using the round Number keys, press 1212 and then press the Check key.

3You are now ready to run an X Report.

Example 11: Go to the PRG or Z modes, using the Manager Password 1313

1Put the PRG key in the Mode key slot and turn it to the PRG or Z position.

2Using the round Number keys, press 1313 and then press the Check key.

3You are now ready to program or take any reports based on your selection in the first step.

Printing the Quick Start Program Confirmation Report

Now that basic programming is complete, check your results with a Quick Start Program Confirmation Report.

If you made a mistake during programming, repeat only the step in question. For example, if only the tax rate is incorrect, just re-program the tax—you do not need to re-set the time, date, and so on.

To print the Quick Start Program Confirmation Report

1Put the PRG key in the Mode key slot and turn it to the PRG position.

2 Using the round Number keys, press 999999 and then press the Amount Tend Total key.

3After the Program Confirmation Report prints, press the Feed key to advance the complete report out of the cash register.

See the next page for an example of this report.

Alpha 583cx User’s Guide

29

abcoffice www.abcoffice.com 1-800-658-8788

Page 35
Image 35
ABC Office Alpha 583cx manual Printing the Quick Start Program Confirmation Report