Programming the Credit Keys
Note
If you want to use Departments 19 and 20 as credit card keys, they no longer work as department keys until you set Flag 16 back to 0.
To program a credit key
1Put the PRG key in the Mode key slot and turn it to the PRG position.
2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.
3To program a card name that prints on the receipt or journal tape, press 51 for Department key 20 or press 52 for Department key 19 and then press the Return key. If you do not program a card name, it prints as
CREDIT 1 or CREDIT 2.
4Type the name of the credit card just as you did when you programmed Department names. You can type up to 12 characters and spaces.
For example, to type VISA, press the following keys:
Press this key... | To get this letter... |
V
I
S
A
•For more information about using the Department keys to type letters, see Programming Department Keys on page 34.
Important
If you enter the wrong character, press the Void key to backspace and delete that character. Now you can continue.
5When you are done, press the Check key.
Alpha 583cx User’s Guide | 47 |
abcoffice www.abcoffice.com