APPENDIX B

GST/PST System for Canada

This appendix explains programming GST or PST for taxation in Canada. Before you can use GST or PST, you must first program Flag 13. For more information about programming flags, see Programming Flag Options on page 56.

To program Flag 13

1Put the PRG key in the Mode key slot and turn it to the PRG position.

2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.

3In the round Number keys area, press 131 and then press the Void key.

Canadian Tax Programming Example

The non-taxable limit is used in certain areas where tax is exempted below a certain amount. For example, any amount below $4.00 is exempted from tax. If there is no non-taxable limit, simply skip the step in brackets in the procedure.

Example 69: GST Tax: 7%, PST Tax: 8%, GST/PST, Tax: Both 7% and 8% calculated on net amount

1Put the PRG key in the Mode key slot and turn it to the PRG position.

2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.

Alpha 583cx User’s Guide

abcoffice www.abcoffice.com 1-800-658-8788

Page 127
Image 127
ABC Office Alpha 583cx manual GST/PST System for Canada, Canadian Tax Programming Example, To program Flag