Chapter 5: Setting Up Your Cash Register - Advanced
Programming PLU Descriptions
The
A total of 1000 Price Look Up codes (PLUs) are available. Each PLU must be programmed with up to a 12 character description that appears on the display and prints on the tape.
Programming PLUs consists of the following:
1Assign a PLU number between 1 and 1000 to each sales item or scan the UPC barcode.
2Assign a price.
3Link the PLU to a department key with the appropriate Tax Status for that PLU.
4Enter a description for the PLU. You must enter a description, even if it is as simple as PLU4.
For example, if PLU #1 is a taxable item, you can link it to a Department key which is set up for tax. If PLU #2 is not a taxable item, you can link it to a Department key which is programmed for no tax.
Important
You do not need to press the decimal point key when entering a price.
After you are done, you can check your results. See Running the PLU
Confirmation Report on page 72.
Programming PLUs without a Barcode Reader
You can program PLUS without using a barcode reader. Use the following instructions.
To program PLUs without a barcode reader
Example 12: Set PLU #1 with a $2.99 price, linked to Department 1, description of APPLE
1Put the PRG key in the Mode key slot and turn it to the PRG position.
2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.
3Press the Qty/Date key to begin programming the PLUs. The PLU prompt appears on the display.
4Using the round Number keys, press 1 and press the PLU key.
48 | Alpha 583cx User’s Guide |
abcoffice www.abcoffice.com