![](/images/new-backgrounds/1187649/187649171x1.webp)
Chapter 8: Running Reports
Running PLU Reports
The PLU report shows the quantity and cost of each PLU Number rung up. Only PLUs that had sales will print.
Important
A PLU Reading must be closed out in the Z position.
To print a PLU report
1Put the Z or PRG key in the Mode key slot and turn it to the X or Z position.
2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.
3Press the PLU key.
To print a PLU sales report, according to an assigned Department number range
1Put the Z key or the PRG key in the Mode key slot and turn it to the X position.
2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.
3In the round Number keys area, specify the Starting Dept Number. It must be 2 digits; for example 01.
4Enter the Ending Dept Number as 2 digits.
5Press the PLU key. The sales history for the PLUs assigned to the departments in the specified range prints.
80 | Alpha 583cx User’s Guide |
abcoffice www.abcoffice.com