Chapter 2: Getting Started

If you do not need to print receipts: Place the black plastic Journal Takeup spindle on its grooves above the Battery compartment. The spindle sits above the paper roll. Press the Feed key to move the paper through the printer about 10-12 inches. Push the paper through one of the narrow openings in the center of the Journal Takeup spindle. Press the Feed key until the paper catches and begins to wind securely around the Journal Takeup spindle. Replace the Journal Compartment Cover.

If you want to print receipts:

Put the customer receipt paper in the receipt window of the Journal Compartment Cover. Make sure you get the paper in the little guides in the window. Use the Cash Drawer/Journal Lock key #515 to lock it.

Installing the Barcode Reader

Your cash register optionally comes with a barcode reader. It allows you to scan items with a UPC symbols, instead of using the keyboard to type the PLU number. If you want to order the barcode reader, contact Royal.

The barcode reader plugs into the port on the lower right side of the cash register. Use the directions below to install it.

To install and program the barcode reader

1Unpack the reader from the box.

2Turn the Mode key to OFF.

3Locate the port for the scanner on the lower right side of the cash register. Plug the reader into the port.

4Now you can program the barcode reader so that you can scan UPC symbols to ring up items. For

specifics, see Programming PLUs with the Barcode Reader on page 49.

6

Alpha 583cx User’s Guide

abcoffice www.abcoffice.com 1-800-658-8788

Page 12
Image 12
ABC Office Alpha 583cx manual Installing the Barcode Reader, Getting Started, To install and program the barcode reader