Programming Scrolling Message Display Times
To program a message
1Put the PRG key in the Mode key slot and turn it to the PRG position.
2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.
3Using the round Number keys, press 6, press the number of the message you want to change, and press the Return key.
For example, to change the message that shows when you move the Mode key to the Off position, press 6 1 Return.
4Type your message, using either the Alphanumeric keys or the special codes. For more information about using the Alphanumeric keys to type letters, see Setting Alphanumeric Descriptions on page 17.
Important
If you enter the wrong character, press the Void key to backspace and delete that character. Now you can continue.
5When you are done, press the Check key. You can program another message by starting with step 3.
Programming Scrolling Message Display Times
After you have programed your scrolling message, you can set the length of time you want the message to run.
After you are done, you can check your results. See Running the Program Confirmation Report on page 70.
Setting the Off Message
OFF message Number of seconds after the register is | Settings in |
turned off before the message starts. | seconds: |
To stop the message after it starts, | Default=05 |
| |
press the Feed key. |
|
To program the Off message time setting
1Put the PRG key in the Mode key slot and turn it to the PRG position.
2If you are prompted for a Manager Password, type the password number and then press the Check key. If you did not program a Manager Password, go to the next step.
3Using the round Number keys, press 1, press the number of seconds you want to delay as 2 digits, and press the Charge key.
Alpha 583cx User’s Guide | 43 |
abcoffice www.abcoffice.com
