Agilent Technologies 54835A, 45A, 46A manual Specifications & characteristics Trigger

Chapter 1: General Information

Specifications & characteristics

Trigger

Sensitivity*2	Internal	dc to 100 MHz: 0.5 div
		100 MHz to 500 MHz: 1.0 div
		500 MHz to 1 GHz: 1.5 div
	Auxiliary	dc to 500 MHz: 300 mVpp
Maximum Input Voltage*	Auxiliary	±15 V, CAT I
Minimum Pulse Width	500 ps at > 1.0 div
(internal, external)
Level Range	Internal	±8 div from center screen
	Auxiliary	±5 V
Sweep Modes	Auto, triggered, single
Trigger Coupling	dc, ac (7 Hz), low frequency reject (50 kHz), high frequency reject (50 kHz).
Trigger Holdoff Range	60 ns - 320 ms
Trigger Modes	Edge, Glitch, Pattern, State, Delay by Time, Delay by Events, Violation (
	Setup/Hold Time, Pulse Width, Transition), Video, Line.
Glitch	Select positive or negative polarity, width. Captures glitches as narrow as 500 ps.
Pattern	Select inputs as High, Low or X (don’t care) to create pattern. Trigger when
	pattern is entered, exited, present > t, present < t, or present over a range of
	time. Captures patterns as narrow as 500 ps.
State	Select one channel as clock, specify other inputs as High, Low or X.
	Logic Type: AND or NAND
Delay by Time	Time: 30 ns to 160 ms. The trigger is qualified by an edge. After the delay, a
	rising/falling edge on any one selected input will generate the trigger.
Delay by Events	Events: 1 to 16,000,000 rising or falling edges. The trigger is qualified by an edge.
	After the delay, a rising/falling edge on any one selected input will generate the
	trigger.
Violation Trigger	Setup/Hold	Modes: Setup, Hold or Setup and Hold.
		Select Clock, Thresholds, setup and/or
		hold time.
	Pulse Width	Triggers on pulse width >t, or <t.
		Captures pulses as narrow as 500 ps.
	Transition	Select Rise Time or Fall Time,
		present > t or present < t, thresholds.
Accuracy (time) for glitch, pulse	1.5 ns - 20 ns: ±(20% setting + 500 ps)
width, and time-qualified pattern	20 ns - 160 ms: ±(3% setting + 2 ns)
Video Triggering	525 lines/60 Hz (NTSC), 625 lines/50 Hz (PAL), 875 lines/60 Hz. Trigger on Field 1
	or Field 2, any line. User defined triggering: User can specify sync pulse level,
	width and polarity, edge number.

1–10