Agilent Technologies 46A, 45A, 54835A manual To connect the mouse or other pointing device

Chapter 2: Preparing for Use

To connect the mouse or other pointing device

To connect the mouse or other pointing device

• Plug the mouse into the matching connector on the back panel of the oscilloscope.

The mouse is included with the oscilloscope, but using it is optional. While you can operate many oscilloscope functions with only the front-panel keys and knobs, you will need the mouse to access advanced oscilloscope functions through the graphical interface, or to find out more about the oscilloscope through the built-in information system.

The optional touchpad pointing device connects in exactly the same way as the mouse.

The supplied mousepad provides the correct surface for smooth mouse operation. To modify the mouse configuration, see the User’s Quick Start Guide.

To attach the optional trackball

1Push in the latch on the trackball baseplate to extend the metal tabs. Insert the lower tab into the frontmost slot on the side of the oscilloscope. You can only install the trackball on the right side of the oscilloscope.

2–5