Agilent Technologies 46A, 45A, 54835A manual Scale Offset Supply Tolerance Limits

Chapter 3: Testing Performance

To test voltage measurement accuracy

Scale		Offset	Supply	Tolerance	Limits
2	V/div*	2.5 V	5 V	±163.8 V	4.836 V to 5.164 V
1	V/div	2.5 V	5 V	±82 mV	4.918 to 5.082 V
500 mV		1.75 V	3.5 V	±41 mV	3.459 to 3.541 V
200 mV		700 mV	1.4 V	±16.4 mV	1.384 to 1.416 V
100 mV		350 mV	700 mV	±8.2 mV	691.8 mV to 708.2 mV
50 mV		175 mV	350 mV	±4.1 mV	345.9 mV to 354.1 mV
20 mV		70 mV	140 mV	±1.64 mV	138.36 mV to 141.64 mV
10 mV		35 mV	70 mV	±0.819 mV	69.18 mV to 70.82 mV

* only in 1 MΩ input

Below 10 mV/div expansion is used and full scale is defined as 80 mV. The ranges from 2 to 9 mV/div are handled in firmware, and will be within specifications when the 10 mV/div range is within specifications.

8Select Vavg from the Voltage submenu of the Measure menu. Ensure that Channel 1 is selected in the Source dialog and click Close.

See figure 3-6.

Figure 3-6

Select Channel 1 as the source for the Vavg measurement

Source Selection for Vavg Measurement

9Select Channel 1 from the Setup menu.

10Set the vertical scaling for Channel 1 to the volts/div value from the first row of the table in step 7. Set the Offset value to the Position value from the first row of the same table. Click Close.

See figure 3-7.

3–9