Agilent Technologies 54835A, 45A, 46A manual WINBIOS Keyboard Commands, System Keyboard Absent

Models: 54835A 46A 45A

1 207
Download 207 pages 4.15 Kb
Page 122
Image 122
c Under Standard Setup, select Floppy A. Select Not Installed. Exit the Floppy A block. d Under Standard Setup, select Floppy B. Select Not Installed. Exit the Floppy B block.

Chapter 5: Troubleshooting

To configure the motherboard jumpers and set up the BIOS

You can use the keyboard in the WINBIOS setup to perform various functions. Refer to the following table:

WINBIOS Keyboard Commands

Keystroke

Action

<Tab>

Change or select a global field.

, , ,

Change or select the current field.

<Enter>

Perform an operation in the current field.

+

Increment a value.

-

Decrement a value.

<Esc>

Abort any window function.

<PgUp>

Return to the previous page.

<PgDn>

Advance to the next page.

<Home>

Returns to the beginning of the text.

<End>

Advance to the end of the text.

<Ctrl><Alt><+>

Change to high speed.

<Ctrl><Alt><->

Change to low speed.

6Do the following within the setup program:

a Double-click on Optimal Defaults. Click Yes in response to “Load Optimal Values?”

b Double-click on Standard Setup, then select Date/Time. Use the mouse to set the current month, day, year, and time. When finished, exit the Date/Time block.

c Under Standard Setup, select Floppy A. Select Not Installed. Exit the Floppy A block. d Under Standard Setup, select Floppy B. Select Not Installed. Exit the Floppy B block.

e Under Standard Setup, select Pri Slave, select Type and change to Floptical. Exit the Primary Slave Hard Disk, then exit Standard Setup.

f Select Advanced Setup, then select System Keyboard. Select Absent (not installed).

System Keyboard Absent

This tells the computer not to check the keyboard during the power-on self test. The keyboard will still function after this.

gUnder Advanced Setup, scroll down to 1st Boot Device and select Floptical.

hUnder Advanced Setup, select 2nd Boot Device and select IDE-0.

iExit the Advanced Setup.

jDouble-click PCI/PnP Setup, then scroll down to select IRQ9. Select ISA, then exit PCI/PnP Setup.

kDouble-click on Peripheral Setup, then select OnBoard Primary/Secondary IDE. Select Primary, then exit Peripheral Setup by clicking on the box in the upper left corner.

lDouble-click on Power Management.

mClick Power Management/APM and select Enabled.

nClick Hard Disk Power Down Mode and select Suspend.

oClick Hard Disk Time Out (Minute) and select 15 min.

pExit Power Management Setup.

qHold down the Insert key on the external keyboard while exiting the Setup program and save the changes you have made. Continue to hold the Insert key until the monitor shows the same information as in step 4.

5–45

Page 122
Image 122
Agilent Technologies 54835A, 45A, 46A manual WINBIOS Keyboard Commands, System Keyboard Absent