Appendix A: Remote features

Changing call diversion remotely *

You can call your telephone system from outside to set up or change a call diversion for your
telephone or for other telephones.
This is possible from any telephone with DTMF suffix dialling. In many cases, you can use only
certain pre-set telephones for this feature. Your system administrator will inform you.
"Changing call diversion remotely" must be enabled by your system administrator. Your system
administrator will tell you the remote control access number and PIN and also the codes for
activating and deactivating call diversion.
1. Dial the remote control access number from the external telephone.
2. Enter your internal number.
3. Enter your PIN.
4. Enter the Codes for Activate Call diversion.
5. Enter the Diversion target number.
6. To deactivate the diversion enter the appropriate code.
7. To set up or to change the call diversion, enter the codes for Activate follow-me,
beginning with as asterisk.
8. Enter the system’s external line code and the new destination to which you want to
divert the calls.
As confirmation, an acknowledgement tone sounds after a short time.
9. To deactivate the call diversion, enter the code for Deactivate follow-me.
1408/1416 at Integral 5 - User Guide May 2010 115