Baldor MN1274 06/2001 Receiving and inspection, Identifying the catalog number, Catalog number MD

1.2Receiving and inspection

When you receive your MintDrive, there are several things you should do immediately:

1.Check the condition of the shipping container and report any damage immediately to the carrier that delivered your MintDrive.

2.Remove the MintDrive from the shipping container and remove all packing material. The container and packing materials may be retained for future shipment.

3.Verify that the catalog number of the MintDrive you received is the same as the catalog number listed on your purchase order. The catalog/part number is described in the next section.

4.Inspect the MintDrive for external damage during shipment and report any damage to the carrier that delivered your MintDrive.

5.If MintDrive is to be stored for several weeks before use, be sure that it is stored in a location that conforms to the storage humidity and temperature specifications shown on page 83.

1.2.1Identifying the catalog number

MintDrives are available with different current ratings and package sizes.

The catalog number describing the model is marked on a label on the side of the unit.

It is a good idea to look for the catalog number (sometimes shown as ID/No: ) and write it in the space provided below.

Catalog number: MD_____________-_______
Installed at: ___________________________	Date: ______

A description of a catalog number is shown below, using the example number MD1A05TB-RC23:

	Meaning	Alternatives
MD	The unit is a member of the MintDrive family.	-
1	Requires an AC supply voltage of 115 Volts.	2=230V
A05	Continuous current rating of 5.0A.	A02=2.5A; A07=7.5A;
		A10=10A; A15=15A
T	Built in mains power supply.	S=Built in mains power supply with
		DC out for powering other drives
B	Dynamic Brake with a built in transistor and resistor	R=Requires external braking resistor
	(available on 2.5A and 5A models only).
R	Feedback option is a resolver.	E=Encoder
C	CAN Bus option (MintDrive is always fitted with CAN).	-
2	Serial port type is combined RS232 / RS485.	-
3	Additional 24VDC supply is required to power the	0=Self generated internal 24VDC
	internal MintDrive logic*.	logic supply*

*An external 24VDC supply will always be required to operate the enable input and digital inputs on connectors X13 and X5. See pages 26, 35 and 37.

2