Baldor MN1274 06/2001 installation manual Analog Outputs, Bipolar, AUXDAC.2 AUXDAC.3

3.2.4Analog Outputs, Bipolar - X11

	Location	Connector X11
	Pins	6	7
	Name	AOUT2	AOUT3
	Mint keyword	AUXDAC.2	AUXDAC.3
6
	Description	Two independent assignable outputs.
7
		Output range: ±10VDC.
		Resolution: 8-bit with sign.
		Output current: 1mA maximum.
		Update interval: 2ms.

Two programmable analog outputs that can be used to provide real time status of various control conditions. The voltage from the output buffer is supplied through a 50Ω resistor for short circuit protection.

GND

Output 2

Output 3

X11

1

6

7

AOUT2 (AUXDAC.2)

AOUT3 (AUXDAC.3)

Figure 13 - AOUT2 and AOUT3 analog outputs

CAUTION: Following power-up or a system reset, both outputs will initially be set at approximately +10V. This condition will remain, for a short period, during the software initialization process. For this reason, care should be taken if this output is being used as a drive reference for a speed controller.

32