5.3Watch window

The Watch window contains four tabs, providing real-time information and allowing tuning of the motor.

If a tab is not visible, click the buttons at the bottom of the window.

5.3.1Quick Watch tab

The Quick Watch tab provides real-time information about various WorkBench and motor parameters. Up to four user selectable parameters can be monitored at the same time.

To select a parameter to be monitored, click one of the parameter boxes on the right of the QuickWatch tab.

In the drop down box that appears, click on the item you wish to monitor.

The value will appear in the line just below the drop down box.

Values are sampled, in turn, every 100ms although this can be changed by clicking the arrows beside the Time Between QuickWatch Samples (ms) box

The Capture The QuickWatch Channels frame allows the selected

parameters to be captured and shown on a graph. To select the sampling time, click the arrows beside

the Seconds box , then click the Capture button.

70

Page 82
Image 82
Baldor MN1274 06/2001 installation manual Watch window, Quick Watch tab