4.The Save As dialog box will be shown.

The first file to save is the project file.

This file can be loaded into MCT and edited later. Select a folder and enter a filename for the project file. Click Save .

5.The second file to save is the configuration file.

This is the file that can be loaded into Mint Workbench and sent to the MintDrive.

Select a folder and enter a filename for the configuration file.

Click Save .

A number of things will now happen:

HThe configuration file will be saved; H MCT will be closed;

H Mint WorkBench will be started;

H The configuration file will be automatically loaded into WorkBench.

66

Page 78
Image 78
Baldor MN1274 06/2001 installation manual