Baldor MN1274 06/2001 installation manual Dimensions and mounting, Package dimensions

HIf multiple units are being mounted side by side, a spacing of 0.5” (13mm) must be provided between the units and from the unit to the side of the cabinet / enclosure.

HTo comply with CE directive 89/336/EEC an appropriate mains filter must be installed.

For MintDrives requiring the external 24VDC logic supply, a 24V filter must also be installed. See page 18.

2.2.1Dimensions and mounting

Ensure you have read and understood page 8. Mount the MintDrive on its rear side, the side opposite to the front panel. The MintDrive must be mounted upright to ensure adequate cooling (you can check this by ensuring that the Hazardous Voltages warning information is clearly readable to you). M5 bolts or screws should be used to mount the unit.

W1

H3

H2

H1

W2	W3
D	W4

Package A

2.5A

Package C

10A / 15A

Package B

5A / 7.5A

					Dimensions inches (mm)						Weight
Package	Current	H1	H2	H3		W1	W2	W3	W4	D	lb (kg)
A	2.5A	6.81	7.67	8.07		0.6	0.6	1.57	3.31	6.00	4.89
		(173)	(195.5)	(205)		(15)	(15)	(40)	(84)	(152)	(2.22)
B	5A /	6.81	7.67	8.07		0.9	0.9	1.57	4.29	6.00	5.31
	7.5A	(173)	(195.5)	(205)		(23)	(23)	(40)	(109)	(152)	(2.41)
C	10A /	14.05	15.12	15.75		1.1	0.37	1.42	2.17	10.43	9.92
	15A	(357)	(384)	(400)		(27.5)	(9.5)	(36)	(55)	(265)	(4.5)

Figure 1 - Package dimensions

9