Baldor MN1274 06/2001 installation manual Contents, Basic Installation, Introduction

Contents

1	Introduction		1
	1.1	MintDrive features	1
	1.2	Receiving and inspection	2
		1.2.1 Identifying the catalog number	2
	1.3	MintDrive indicators	3
		1.3.1 Monitor LED display	3
		1.3.2 CAN 1 and 2 LEDs	3
		1.3.3 Ready LED	3
		1.3.4 DB On (Regeneration Load) LED	3
	1.4	Units and abbreviations	4

2	Basic Installation			5
	2.1	Outline		5
		2.1.1	Hardware requirements	5
		2.1.2	RS485 / RS422 systems	7
		2.1.3	Power sources	7
		2.1.4	Tools and miscellaneous hardware	7
		2.1.5	Other information needed for installation	7
	2.2	Mechanical installation and location requirements		8
		2.2.1	Dimensions and mounting	9
	2.3	Power connections		10
		2.3.1	Grounding	11
		2.3.2	Input power conditioning	12
		2.3.3	Power disconnect and protection devices	12
		2.3.4	Wire sizes	14
		2.3.5	Single phase connection to package size A or B	15
		2.3.6	Single phase connection to package size C	15
		2.3.7	Three phase connection to package size C	16
		2.3.8	24V control supply	16
		2.3.9	DC Bus power connections from package size C	17
		2.3.10 Power supply filters		18
	2.4	Motor connections		19
		2.4.1	Motor circuit contactors	20
		2.4.2 Regeneration resistor (Dynamic Brake resistor)		21
	2.5	Feedback connections		22
		2.5.1	Resolver option	23
		2.5.2	Encoder option	25
	2.6	Drive enable		26

vii