9.Using the check boxes below the graph, select the Measured velocity and Demand velocity traces.
Demand velocity
Measured velocity
Figure 15 - Correct value of KVELFF
It may be necessary to make changes to the calculated value of KVELFF. If the trace for Measured velocity appears above the trace for Demand velocity, reduce the value of KVELFF. If the trace for Measured velocity appears below the trace for Demand velocity, increase the value of KVELFF. Repeat the test after each change. When the two traces appear on top of each other (approximately), the correct value for KVELFF has been found as shown in Figure 11.
| MN1903 |
