1-2 GeneralInformation MN1903

Safety Notice
Only qualified personnel should attempt the start-up procedure or troubleshoot this equipment.
Thisequipment may beconnected to other machines that have rotating parts or parts that are
controlledby thisequipment. I mproper use can cause serious or fatal injury. Onlyqualified personnel
shouldattempt t os tart-up, program or troubleshoot this equipment.
Precautions
WARNING: Donot touch any circuit board, power device or electricalconnection before you
first ensure that no high voltage is present at this equipment or other equipment to
whichit isconnected. Electricalshock can cause serious or fat al injury. O nly
qualifiedpersonnel shouldattemptto s tart-up, program or troubleshoot this
equipment.
WARNING: Besure that you are completely familiar with the safe oper ation and programming
ofthis equipment. Thisequipment may be connected to other machines that have
rotatingparts orparts that are controlled by this equipment. Improperuse can
cause serious or fatal injury. Only qualified personnel should attempt to program,
start-up or troubleshoot this equipment.
WARNING: Thestop input to this equipment should not be used as the single means of
achieving a safety critical stop. Drivedisable, motor disconnec t, motor brake and
othermeans s hould be used as appropriate. Onlyqualified personnel should
attemptto program, s tart-up or troubleshoot this equipment.
WARNING: Improperoperation or programming may cause violent motion of the motor s haft
anddriven equipment. Becertain that unexpectedmotor shaft movement will not
cause injury to personnel or damage to equipment. Peaktorque of several times
therated motor t orque can occur during control failure.
CAUTION: The safe integration of this equipment into a machine sys tem is the responsibility
ofthe machine des igner. Be s ure to comply with the local safety requirements at
theplace w here the machine is to be used. In Europe these are the Machinery
Directive, the ElectroMagnetic Compatibility Directiv e and the Low Voltage
Directive. In the United States this is the National Electrical code and loc al codes.
CAUTION: Electrical components can be damaged by staticelectricity. UseESD
(electro-static discharge) procedures when handling this drive.