6.2 NextMove PCI indicators
6.2.1 Status and CAN LEDs
The backplate of the NextMove PCI contains four LEDs. S1 and S2 represent general status information. C1 and C2 are CAN traffic indicators. The LEDs may illuminate red or green and can be continuous or flashing.
C1
S1
C2
S2
LED State(s) | Meaning |
|
|
All off | NextMove PCI is not powered. |
|
|
All red | In hardware reset (see section 4.8). |
|
|
All green, | In software reset, with no errors (see section 4.8). |
cycling |
|
|
|
All red, | In software reset, Power On Self Test (POST) error has occurred. |
cycling |
|
|
|
S1 green, | Program is running OK. |
flashing |
|
|
|
S1 red, | Program is running, but there is an initialization error. |
flashing |
|
|
|
S1 red, | Asynchronous error - for example, a limit switch has been activated. |
flashing fast |
|
|
|
S1 green, | Miscellaneous error - for example, the output driver board is not |
flashing fast | working. |
|
|
All green, | Updating firmware. |
flashing |
|
|
|
All red, turn off | POST is in operation (after reset). |
in sequence: |
|
C1, S1, S2, C2 |
|
|
|
C2 green, | Message received on CAN2 bus. |
flashing |
|
|
|
MN1903 |
