5Afterselecting or entering a value, press
[Start/Copy].
6Repeatsteps 4 and 5 as needed.
7Whenthe operation is complete, press [Stop].
Registrationends and the fax returns to standby
mode.
Note
After60 seconds of no operation panel input, the fax returns to standby mode and any unregistered
changesare lost.

Entering a number

Wheneveryou are prompted to enter a fax number or a telephone number, follow these procedures.
Usethe numeric buttons to enter the number.
Youcan enter up to 20 digits for your fax number or 50 digits for a speed dialling number.
Besure to enter the appropriate area code if dialling outside the area served by your local exchange.
Youcannot enter dashes, slashes, commas, or other punctuation.
Usethe One-touch Speed Dialling buttons as follows:
Toenter a space between numbers, press [Space].
Ifyou make a mistake, press [Clear] and enter the number again.
Toerase a previously registered number, press [Clear]. You can also enter a new
numberover the old one.
Ifyou need to enter a pause for any reason,
Press[Redial/Pause] at the desired point in the sequence when entering a series of
digits.
Apause within a number is 2 seconds long*. The length of this pause can be
adjusted.See MID PAUSE SET in TX SETTINGS, p. 87. A pause at the end of
anumber is fixed at 10 seconds.
* 4seconds long in the UK and Hong Kong.
Start/Copy
DATA ENTRY OK
Stop
TEL=
SendOptions Report
Cleaning
R Space
Clear Tone
D.T.
REGISTERINGYOUR NAME AND NUMBER
22222222222222222222222222222222222222222222
29