SENDING FAXES

Cancelling Sending

To stop sending before the fax is ®nished, press [Stop]. Then you may need to open the operation panel to remove the document. See Clearing document jams, p. 62.

Redialling

jManual

To start dialling again, just press [Redial/Pause]. (When you press [Redial/Pause], the previous number dialled with the numeric buttons is redialled.)

jAutomatic

The fax automatically redials twice* after the ®rst attempt at sending fails (e.g. the line was busy). The time between redials is two minutes.*

You can change the number of redials and the time between redials by changing the AUTO REDIAL setting in the TX SETTINGS (see p. 87).

If the fax fails to get through after the second redial, the fax beeps. *Factory setting

The LCD displays REDIALLING while the fax is in the redialling process.

REDIALLING

jTo cancel automatic redialling

You can cancel automatic redialling anytime by pressing the [Stop] button.

However, when memory is used during sending (including Delayed Sending and Sequential Broadcasting), you cannot cancel redialling while REDIALLING or MULTI TRANS. ON is displayed on the LCD. In this case, wait until dialling begins, then press [Stop] to cancel redialling.

60

Page 72
Image 72
Canon B155 manual Cancelling Sending, Redialling, Manual, Automatic, To cancel automatic redialling