![](/images/new-backgrounds/1306743/306743197x1.webp)
SETTINGS
TX SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.
Name | Description | Settings |
ECM TX | Enable/disable error correction during transmission. | ON/OFF |
|
|
|
MID PAUSE SET | Set the length of the pause you insert into a dialling | 2 seconds (1 to 15)* |
| sequence. |
|
|
|
|
AUTO REDIAL | Determine whether the fax will redial a number if it fails to | ON/OFF |
| get a response on the ®rst attempt. |
|
REDIAL TIMES | Set the number of retries. | 2 times (1 to 10)** |
REDIAL INTERVAL | Set the period of time between rediallings. | 2 minutes (2 to 60)*** |
*4 seconds (4 to 11) in the UK and Hong Kong.
**Up to 2 times in Australia, 4 times in the UK and Ireland, and 5 times in New Zealand.
***Minimum interval is 1 minute in New Zealand.
RX SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 83 and 84.
Name | Description | Settings |
ECM RX | Enable/disable error correction during reception. | ON/OFF |
|
|
|
FAX/TEL SWITCH | Enable/disable FAX/TEL switchover. When ON, this feature |
|
| answers calls, and if no fax tone is detected, the fax rings |
|
| to alert you of an incoming call. |
|
RING START TIME Set the duration that the fax listens for a fax tone before starting to ring.
8 seconds (0 to 30)
F/T RING TIME | Set the length of time the fax will ring to alert you of an | 22 seconds (10 to 300) |
| incoming call. |
|
F/T SW ACTION | Select the action taken after the F/T RING TIME expires. | DISCONNECT/RECEIVE |
|
|
|
INCOMING RING | When the fax is set to Fax Only Mode or Fax/Tel Mode and | ON/OFF |
| an extension phone is connected, set the fax to ring when |
|
| it receives a call. |
|
RING COUNT | Set the number of incoming rings before the fax answers. | 2 times (1 to 99) |
|
|
|
MAN/AUTO SWITCH | Determine if the fax switches to document receive mode | ON/OFF |
| after the fax rings for a speci®ed time when the fax is in the |
|
| manual receive mode. |
|
RING TIME | Set the amount of time the fax will ring before switching to |
| document receive mode. |
10 seconds (1 to 99)
REMOTE RX | Allows you to dial the REMOTE RX ID on an extension | ON/OFF |
|
| |
| phone to start receiving a document. |
|
|
|
|
REMOTE RX ID | If you set REMOTE RX ON, you can change the remote | 25 (00 to 99, including and #) |
|
| |
| receiving ID. |
|
|
|
|
|
|
|
|
|
|
MEMORY RX | Turn on/off memory receiving of a document. | ON/OFF |
|
| |
|
|
|
|
|
|
NET. SWITCH | Enable/disable the network FAX/TEL switching feature. | ON/OFF | 7 |
| |
(Australia and New Zealand |
|
|
|
| |
|
|
|
|
only)
87