Windows Macintosh Other
Check the printer and interface cable
Check the printer status and the interface cable connections. (☞96)
Windows Macintosh Other
Check to see if paper or special print media that you are using has been selected in the printer driver
If you are printing on a paper size that has not been selected in the printer driver or the software application, part of text may be cut off. Use the selected paper size, or change the paper size selection in the software application. Check the printer driver paper size selection and make sure that it is the same as the paper size selection of the software application. If the software application does not allow paper size selection, select the paper size with the printer driver.
Windows Other
Check to see if you have disrupted the infrared data transfer in progress or activated other infrared communication device nearby
Never disrupt the infrared communication between the printer data port and the computer or PDA port. Any physical disruption of more than
10 seconds will cause cancellation of the print job, and blank sheets will be ejected from the printer. Remove any physical object blocking the line of sight between the infrared ports on the printer and computer.
Never attempt to use other infrared devices nearby while a print job is executing. For example, using electrical home appliances such as remote controlled TV could disrupt the infrared data transmission between the printer and computer and cause the print job to halt.
