If the front cover is closed, open it.

Replacing the battery pack

Follow this procedure to replace the battery pack.

You can replace the battery pack at any time. You may want to purchase and carry extra battery packs for emergencies. However, please remember that new battery packs must be fully charged before you can use them. Before you travel, make sure new battery packs are fully charged.

You must also replace a battery pack after it is exhausted. The CHARGE/ERROR lamp will flash and the printer will beep six times when the battery pack becomes exhausted. After the battery pack is exhausted, it cannot be recharged and used again.

HANDLE THE BATTERY PACK CAREFULLY BY FOLLOWING THE

GUIDELINES DESCRIBED ON PAGE 30.

1. Press the POWER button to switch the printer off.

2. If the optional Auto sheet feeder is installed on the printer, remove it.

3.

4. Push the battery pack release to the right . The battery pack will spring slightly out of the printer .

1

2

5. Remove the battery pack from the printer.

62Chapter 5 Daily Operation and Printer Maintenance

Page 64
Image 64
Canon BJC-55 user manual Replacing the battery pack