1.
Press the POWERbutton to switch the printer off.
2.
Connect the power cord to the AC adapter , insert the DC plug
into the printer , and insert the power cord into a power source .
The CHARGE/ERRORlamp will remain illuminated green until
the battery pack is completely recharged.
3.
When the CHARGE/ERRORlamp goes off, you can disconnect
the AC adapter.
The battery pack requires six hours (maximum) to recharge.
The battery pack may become warm during a long print job and may
not start recharging until it has cooled (max. 30 minutes).
21
3
CARTRIDGE
POWER ERROR
CHARGE
RESUME
61
Chapter 5 Daily Operation and Printer Maintenance
5