copier transparencies as they cannot absorb the ink.
•If
•You can also produce original designs on
•For envelopes, use European DL size (220 x 110 mm) or U.S. Commercial 10 (241 x 105 mm (9.5 x 4.1 inches)).
•When you use special print media, make sure that you always print on the correct side. For details, refer to the table for loading special media. (☞49)
■Loading paper and other media
Paper and other media must be loaded one sheet at a time.
•Before you attempt to load single sheets of paper or other media into the feed slot on the front of the printer, make sure the battery pack is installed. If the battery pack is not installed, you may experience problems feeding paper or other media into the front feed slot. Install the battery pack and leave it installed, even if you intend to use the printer only with the AC adapter.
•Before you load a sheet of paper or other media in the printer, make sure the computer is turned on. If you turn on the computer after the printer is loaded, the sheet will eject from the printer.
Follow this procedure to load paper or other media one sheet at a time.
1.
2.
Open the front cover.
Make sure that battery is installed. If the battery is not installed, install it. (☞28) An error will occur if the battery is not installed.
Make sure the printer driver and software application are set up for the media you are going to print on. For details, refer to the Windows Printer Driver Guide or Macintosh Printer Driver Guide.
48 Chapter 3 Printing