5.
After removing the partially used BJ Cartridge, use the BJ Cartridge
Container SB-10 supplied with the printer.
Align the marks on the BJ Cartridge with the marks on the container
and insert the BJ Cartridge into the container.
6.
Screw the lid onto the storage container until it stops then continue
twisting the lid until the mark on the lid is aligned with the mark on
the body of the storage container.
Always screw the lid on tightly to prevent the BJ Cartridge from drying
out.
7.
If you are installing a new BJ Cartridge, remove the BJ Cartridge
from its protective packaging.
53
Chapter 3 Printing
3
Mark
Mark
Lid
Black BJ Cartridge BC-10 Color BJ Cartridge BC-11e/
BJ Cartridge BC-12e Photo
(Illustration below shows the
Color BJ Cartridge BC-11e.)
or