Canon VB-C10R user manual

System Configuration

● Install the Helper Viewer from the “MonSetup.exe” file on the supplied CD-ROM. Note ● The manual for the WebView Livescope software is provided on the supplied

CD-ROM (Mon-E.pdf).

●To connect the VB-C10/VB-C10R to the Internet, you require a leased line connection to an Internet service provider or a LAN-type dialup IP connection. If you are using a LAN-type dialup connection, check that the connection supports bidirectional calling.

Example of System Configuration with WebView Livescope MV - Optional

	WebView Livescope MV
Ehernet	Windows98SE/Me/NT4.0/2000/XP
(10/100Mbps)	(Internet Explorer 5 or later required)

VB-C10R

VB-C10

VB-C10

The WebView Livescope MV software (→ P.1-7) is convenient if there are several VB-C10/VB- C10R installed on a LAN and you wish to concentrate on monitoring videos from them.

The WebView Livescope MV software consists of MV Manager and MV Station. MV Manager lets you uniformly manage VB-C10/VB-C10R operating status. It also lets you select and create

amonitoring screen best suited to the number of VB-C10/VB-C10Rs on the LAN from among a rich variety of examples. MV Station lets you use the monitoring screen created in MV Manager to view videos from multiple points where VB-C10/VB-C10R units are installed while also remote controlling cameras and external devices.

Optional Products

•Webview Livescope MV version 2.0

•Webview Livescope MV version 2.0 LE

Products sold separately

•Wide-angle Converter WL-37 (for VB-C10)

•Sensor

•Relay

Before Using the VB -C10/VB -C10R

1-5