3-11

Setup Procedures
Detail Settings
Camera Settings Page

Use this page to set the camera control parameters and the video capture size and video quality.

Using VB Administration Tools is a convenient way to set view restrictions (→ P.4-12).

Camera Settings
“Camera Name”
Used in the camera selection bar in the WebView Livescope
Viewer.
“Wide Converter”
Select “Used” when a wide-angle converter is mounted on
the camera.
“Video Capture Size”
The available settings are 640 × 480, 320 × 240 and 160 ×
120.
“Video Quality”
Select an adjustment setting between 1 and 5. Higher values
give better video quality but a slower frame rate since the
amount of video data increases.
*With the VB-C10R, the displayed pan and tilt values
change.