4-19
VB Administration Tools
Note
Edited content will not be reflected in the viewer accessed to the VB-C10/VB-C10R
at the stage when the “Send” button is used to send edited content to the VB-C10/
VB-C10R. After confirming the edited content, be sure to use the “Reflect set values”
button to reflect the settings in the VB-C10/VB-C10R.
7Panorama Preview
Displays the panorama picture saved in the VB-C10/VB-C10R. A preset preview frame (yellow)
that reproduces the preset values that were set is displayed on the panorama picture. By
dragging this frame to move it or change its shape, or by clicking on the panorama picture, the
changes can be reflected in the setting values.
Also, when a view restriction is set for the VB-C10/VB-C10R, the view restriction frame is
displayed on the panorama picture in blue or red. If the frame is red, this indicates that the
entered preset values are outside the view restriction.
8Preset Name
A name can be assigned to the presets.
9The Preset Values Entry box and the Brightness Selection box
The current preset settings are displayed in the Preset Values Entry box. These values can be
changed by entering new values.
●Preset Settings
“Pan”............ Sets the pan position for the camera.
“Tilt”.............. Sets the tilt position for the camera.
“Zoom” .........Sets the value for the camera’s angle of zoom.
●Brightness
Sets the target value for the camera’s auto exposure feature. Select “Brighter” if the picture
is darker due to backlight or other factor.
10Get Value button
When the “Get Value” button is clicked, the current shooting angle of the VB-C10/VB-C10R is
retrieved and reflected in the settings.
11Admin Viewer button
This button can be used to start up Admin Viewer.
12Preview button
Clicking this button allows checking of the set values specified in the Preset Values Entry box
with the Preset Preview frame.
13Status List
Displays the results of communication between this tool and the VB-C10/VB-C10R.
Preset Setting Tool