
Before Using the VB-C10/VB-C10R
Installing the VB-C10/VB-C10R
Install in a flat and stable location.
Firmly tighten the 2 screws (not supplied).
Mounting plate
Screw 
Screw
(Installation)
•Distance between tapped holes: 120 mm (4 18/25 in.)
•Tapped hole diameter: 6.0 mm (1/4 in.)
•Mounting plate thickness: 1.6 mm (1/16 in.)
aWARNING:
Install the camera securely.
●When installing the
●When installing the
●At least once a year, check for looseness in the camera installation mount. (If the optional
● The permissible camera installation angles are ±20° from the horizontal. (±15°
Note
when the optional
●The MAC address required when making network settings is shown on the bottom of the
Using a Tripod (VB-C10)
The screw for mounting a tripod is on the bottom of the
● Do not overtighten the mounting screw.
30 mm |
(1 3/ in.) |
Less than
Note
If excessive force is used to tighten the mounting screw, camera head movement may be impeded, or other malfunctions may result.
16 |
or wider |
6.0 mm (1/4 in.)
Mounting screw
●Always use a tripod mounting screw that is less than 6.0 mm (1/4 in.) in length. The use of screws 6.0 mm (1/4 in.) long or longer could damage the camera. Also, the tripod seat used should be at least 30 mm (1 3/16 in.) in diameter.