Canon VB-C10 Apply the View Restriction, View Restriction Values Entry box and Get Value button

View Restriction Tool

6Apply the View Restriction

View restriction settings are applied when this item is selected.

7View Restriction Values Entry box and Get Value button

The current view restriction settings are displayed in the View Restrictions Value Entry box, and new values can be entered to change the settings. When the “Get Value” button is clicked, the current shooting angle of the VB-C10/VB-C10R can be retrieved and reflected in the setting values.

●View restriction setting values

“Upper value” ...... Value for the upper limit of the view restriction. The upper value of the

	VB-C10/VB-C10R’s shooting angle is obtained using the “Get Value” button.
“Lower value”	Value for the lower limit of the view restriction. The lower value of the VB-C10/
	VB-C10R’s shooting angle is obtained using the “Get Value” button.
“Left value”	Value for the left limit of the view restriction. The left value of the VB-C10/
	VB-C10R’s shooting angle is obtained using the “Get Value” button.
“Right value”	Value for the right limit of the view restriction. The right value of the VB-C10/
	VB-C10R’s shooting angle is obtained using the “Get Value” button.
“Telephoto”	Value for the telephoto limit of the view restriction. The zoom value of the
	VB-C10/VB-C10R’s shooting angle is obtained using the “Get Value” button.
“Wide-angle”	Value for the wide-angle limit of the view restriction. The zoom value of
	the VB-C10/VB-C10R’s shooting angle is obtained using the “Get Value”
	button.

8Admin Viewer button

This button can be used to start up Admin Viewer.

9Preview button

Clicking this button allows checking of the set values specified in the View Restriction Values Entry box with the View Restriction Preview frame.

10Status List

Displays the results of communication between this tool and the VB-C10/VB-C10R.

Note

Edited content will not be reflected in the viewer accessed to the VB-C10/VB-C10R

at the stage when the “Send” button is used to send edited content to the VB-C10/

VB-C10R. After confirming the edited content, be sure to use the “Reflect set values” button to reflect the settings in the VB-C10/VB-C10R.

4-14