Cisco Systems ICS-7750 manual Organization

Preface

Organization

Note This guide is not intended to instruct you on how to install or service a

Cisco ICS 7750 but rather is intended to provide an overview of how to use the product in voice and data networking.

Organization

This guide is organized as follows:

•Chapter 1, “Overview,” provides a functional overview, describes the features, and gives a system overview of the Cisco ICS 7750.

•Chapter 2, “Processor Cards Feature Summary,” describes the features of the cards supported by the Cisco ICS 7750, such as the analog station interface (ASI), system processing engine (SPE), system switch processor (SSP), multiservice route processor (MRP), and system alarm processor (SAP).

•Chapter 3, “Summary of Power and Cooling System Features,” describes the features of the chassis, backplane, power supplies, and fan tray of the Cisco ICS 7750.

•Chapter 4, “Summary of System Software Features,” describes the features of the system software, such as the ICSConfig program, Cisco ICS System Manager, and the Fault Management Module (FMM).

•Chapter 5, “Summary of Software Applications Features,” describes the features of applications that are supported on the Cisco ICS 7750, such as Cisco CallManager, Cisco IOS Firewall, Cisco Unity, and AutoAttendant.

•Chapter 6, “Features of Cisco IP Phones,” describes the features of the Cisco IP Phones and the Cisco IP SoftPhone and WebAttendant applications.

•Chapter 7, “Features of LAN-Based Switching Technologies,” describes the features of the Catalyst 3524-PWR XL switch, the Catalyst 4000 switch, and the Catalyst 6000 switch.

•“Chapter 8, “Features of Other Compatible Cisco Devices,” describes the features of the Cisco 1750 Modular Access Router, the Catalyst 2600 switch, the Catalyst 2900 series switches, the Cisco Voice Gateway 200, and the DT-24+ and DE-30+ modules.

Cisco ICS 7750 System Description

x 78-10360-02