Chapter 2 Processor Cards Feature Summary
System Switch Processor Card
The Ethernet ports are identified as follows:
•f0/1—External 1x port for connecting to 10BASE-T, 100BASE-TX, and 10/100 Ethernet switches
•f0/2—External 2x port for connecting to 10BASE-T, 100BASE-TX, and 10/100 Ethernet switches
•f0/3—Slot 1
•f0/4—Slot 2
•f0/5—Slot 3
•f0/6—Slot 4
•f0/7—Slot 5
•f0/8—Slot 6
Feature Summary
Key features and benefits of the SSP include the following:
•10BASE-T/100BASE-TX support—The 10/100 Ethernet support delivers high performance where required. Any investment in legacy 10BASE-T equipment is preserved.
•Autosensing—Each 10/100 port detects the speed of an attached device and automatically configures the port for 10 or 100 Mbps. Autosensing eases deployment in mixed 10BASE-T and 100BASE-T environments.
•Autonegotiating—Each 10/100 port automatically selects half- or full-duplex transmission mode to optimize bandwidth utilization.
•Flash memory—The SSP stores configuration information in Flash memory and NVRAM.
•Supports IEEE 802.1p class of service (CoS) with two queues on each port to prioritize voice and data traffic.
•Supports quality of service (QoS).
| | Cisco ICS 7750 System Description | | |
| | |
| 78-10360-02 | | | 2-9 |
| | |
